BYINTEK Best inside

Facebook-f Xing Instagram Youtube Snapchat-ghost Tiktok

Welcome to BYINTEK Support

About U4

About U4  firmware upgrade

U4 android projector support OTA online update Android firmware. Every time we update the firmware, after uploading to the cloud server, U4 Smart Version will prompt to update, Operation video guide: https://youtu.be/y-GIjTJMvuE  

It can also be upgraded via U disk

Step:

  1. Prepare a USB drive smaller than 32GB.

2.You can click the icon below to download the firmware of U4 . Do not change the name of the file, otherwise the projector will not recognize it.

3.After downloading the firmware, copy it to the root directory of the USB drive. Be careful not to put the firmware in the folder.

  1. Insert the USB drive into the projector’s USB port.

5.Then connect the power cord of the projector.

  1. Press and hold the power on key until the upgrade progress bar pops up on the screen, and wait for the automatic upgrade.

Note: the upgrade process must not be interrupted.

Firmware upgrade operation guide video: https://youtu.be/k7ulifOD0w4

U4 Android firmware download 01

Firmware version:

About U4  Wireless screen projection function

wifi-display function, the projector displays the image and sound of the mobile phone screen through the mirroring function of the smartphone. This is not achieved using the Bluetooth function. It is achieved through the screen mirroring function that comes with the phone.

  1. ios smartphone realizes screen mirroring via projector’s “Maxhub Share” app

Operation instruction video connection: https://youtu.be/RhgYDCehNXw 

  1. Android smartphones realize screen mirroring via projector’s “Kindlink” app

Operation instruction video connection: https://youtu.be/tQzXFIW5AhY 

 

Note: Not all Android smartphones support the screen mirroring function. For smartphones that support screen mirroring, there are options similar to this in the “Settings” or “More Functions” options of the smartphone, for example: “Screen mirroing”, “Wifi-display”, “multi-screen”, “screen projection”, “play to”, “media output”, etc.

If the projector’s pre-installed screen mirroring app is not compatible with your Android smartphone, you can also download and install Airscreen, happycast and other apps that support wifi-display on the projector.

Tips：

Some video apps with copyright protection cannot support wireless projection from other devices to the projector. For example, Netflix, iTunes Movie, Google Movie, Amazon Prime do not support this function on some smartphone and computers. All Android system projectors on the market are the same.

U4 Projector Operation Guidance Video 

  1. How to use the  U4 projector (how to turn it on)?

Operation instruction video connection: https://youtu.be/esU08M1ZAo4 

  1. How to connect U4 projector to WiFi?

Operation instruction video connection:  https://youtu.be/kfaNYIo4XJ8 

  1. How to connect U4 projector to other Bluetooth devices

Operation instruction video connection:  https://youtu.be/IrRZkw07SU4 

  1. How to check the system version information of U4 projector?

Operation instruction video connection: https://youtu.be/Oj_JPgTh-98

  1. How to change the system language of U4?

Operation instruction video connection:https://youtu.be/M-O015gd_pk 

  1. How to set the default signal source of U4 after booting, for example to HDMI by default?

Operation instruction video connection: https://youtu.be/MXGArM9QeC4

  1. How to operate U4 to restore factory settings?

Operation instruction video connection: https://youtu.be/yp-N-ZlZr_g 

  1. How to set U4 to flip the screen image during ceiling mount or rear projection?

Operation instruction video connection: https://youtu.be/UTnbAIVt5KQ 

  1. How to adjust the keystone correction of U4（Includes corner keystone）?

Operation instruction video connection:https://youtu.be/ln_uwEWdB5w 

  1. How to adjust  U4 basic electronic digital zoom?

Operation instruction video connection:https://youtu.be/cohfj41Kmbk 

  1. How to operate U4 to upgrade via network OTA?

Operation instruction video connection:  https://youtu.be/y-GIjTJMvuE

  1. How to operate U4 to update firmware via U disk?

Operation instruction video connection:  https://youtu.be/k7ulifOD0w4

  1. How to turn on auto focus on U4？

Operation instruction video connection:  https://youtu.be/Y4nEYEpam24 

  1. How to solve Fire TV stick 4K connected to the projector to play movies no sound？

Turn off Dolby in the setting sound of Fire TV stick 4K.

Step：”setting”—-“display&Sound”—“Audio”—“Dolby digital output”—“Dolby digital plus OFF”, Turn off Dolby，Do it a few times，Confirm whether Dolby is successfully turned off.

      Tips: Some sources can work normally without turning off Dolby and setting them to automatic mode. If there is still no sound in automatic mode, you must turn off Dolby.

Operation instruction video connection:  https://youtu.be/2S77xzLHC84

U4 Projector Maintenance Guide

  1. How to solve the problem of remote control not working?

1.1 The projector comes standard with a 2.4G wireless remote control. If the remote control does not work, you need to re-operate the remote control to pair with the projector.The operation method is to take out the battery of the remote control, start the projector, wait for the projector to turn on, then move the remote control close to the projector, and then install the battery of the remote control, and the remote control will re-pair with the projector.

1.2 If the pairing is unsuccessful, replace a remote control and try again.

1.3 If the replacement of the remote control still fails, it may be that the cable between the remote control receiver and the motherboard is loose. Reconnect the cable between the receiver and the motherboard.

1.4 If there is still a problem, there may be a problem with the remote control receiving circuit board or the main board. Just replace the corresponding parts. There is a disassembly video guide below.

  1. The lens of the BYINTEK U4 projector has no light coming out, and the LED does not work, how can I solve it?

Fault phenomenon:

After the projector presses the power button, you can hear that the fan inside the projector is working normally, but there is no light coming out of the lens at all, maybe the LED is not working.

First, disassemble the projector to check whether the cables on the power board are connected properly. If the cables on the power board are connected normally and there is no looseness, the projector still does not work, and a new power board needs to be replaced. If it is still not normal, you need to replace the LED. If the lens still has no light after replacing the LED, you need to replace the motherboard.

Usually replace the power board projector is normal. LED damage is generally caused by high voltage breakdown of the projector’s LED due to lightning strikes or unstable household power grids.

  1. Replace the power board of BYINTEK U4 series projector

Fault phenomenon: 

The power indicator on the top cover of the projector is not on, or there is no light coming out from the inside of the projector lens (that is, the LED does not work), it may be a problem with the power board, and the power board needs to be replaced

Operation instruction video connection:  https://youtu.be/Z1IHWS_J628 

  1. Replace the focus motor of BYINTEK U4 series projector

 Fault phenomenon:

If you press and hold the “F+” and “F-” buttons of the remote control, the projector lens cannot move back and forth, that is, it cannot be focused. It may be that the focusing motor is not working, or the circuit board connected to the focusing motor is not working. Replace both parts.

       Operation instruction video connection: https://youtu.be/CabEfgpp51w

 

  1. A few minutes after the projector is turned on, a black shadow appears in the middle of the screen and gradually expands. This may be because the LCD cooling fan inside the projector is not working.

Operation instruction video connection:https://youtu.be/eQ-Jdj_GXxE

  1. Replace BYINTEK U4 Projector LED Cooling Fan

Operation instruction video connection: https://youtu.be/reWlL3r8ZHE

  1. Replace the motherboard of BYINTEK U4 projector？

Operation instruction video connection: https://youtu.be/43M4r4VxZV4

  1. How to replace the LCD of the BYINTEK U4 projector? 

Fault phenomenon: 

If the picture image is abnormal, there are colored streaks, or there are cracks, black blocks that will not recover after the projector cools down, etc., the LCD may be damaged and the LCD needs to be replaced. 

Operation instruction video connection: https://youtu.be/-9Y0Wwamvmg

9.What should I do if the remote control does not respond? How to replace theremote control receiver inside the BYITNEK U4 series projector?

Solution:

  1. Turn on the projector first, then remove and re-install the batteries of the remote control.
  1. If it still doesn’t work, please replace the remote
  1. If replacing the remote control does not work, please replace the remote control receiver inside the projector

Replacing the remote control receiver inside the projector, operation guide video URL: https://youtu.be/rr2CIavOgxI

  1. BYINTEK U4 projector all parts disassembly instruction video （disassemble: motherboard, LCD, power board, fan, Insulation glass, reflector, lens, LED, focus motor, speaker, ）

Operation instruction video connection:https://youtu.be/3v6QqbYFfTU