About X30

About X30 system firmware upgrade

The X30 projector supports OTA online firmware updates. Each time the firmware is updated and uploaded to the cloud server, the X30 will prompt you to update.

The operation video guide is as follows: https://youtu.be/jO2iqFgim28

It can also be upgraded via U disk

Operation method 1：

1. You can download the X30 firmware by clicking the icon below. Unzip the file and do not change the file name, otherwise the projector will not recognize it.
2. Copy the firmware to the root directory of the U disk. Note: Do not put it in other folders. 
3. Turn on the projector and let the projector work normally.
4. Insert the U disk into the USB 1 port of the projector
5. Enter the file management, find the files in the U disk, and check whether the firmware has been copied to the U disk.
6. Operating the projector, enter “Settings” – “System” – “USB Disk Upgrade” in turn, Follow the prompts to upgrade
7. Wait for the projector to upgrade, do not power off or terminate the projector upgrade in the middle, otherwise the projector will not work.

Note: the upgrade process must not be interrupted.

Firmware upgrade operation guide video: https://youtu.be/DuZXgI4ccSU

Operation method 2：（For users who cannot upgrade with the first method.）

1. You can download the X30 firmware by clicking the icon below. Unzip the file. Do not change the file name or the projector will not recognize it.
2. Copy the firmware to the root directory of the U disk. Note: Do not put it in other folders. 
3. Insert the U disk into the second USB port of the projector
4. Connect the projector to the power supply, turn on the power switch, and wait for a few seconds
5. Then long press the power button until the upgrade progress bar appears on the screen, and release the button.
6. Wait for the projector to upgrade, do not power off or terminate the projector upgrade in the middle, otherwise the projector will not work.

Note: the upgrade process must not be interrupted.

Firmware upgrade operation guide video: https://youtu.be/MV8u-UmwHRM

Note: Pay attention to distinguish the firmware, there are two versions, the firmware cannot be universal

  There are “4.41 inches” and “4.45 inches”

4.41″  LCD: ZTW44FHE22-V01

Firmware version: 2023_0728

Projector SN: X301220C23040001~300

X30 (4.41″ LCD) firmware download 01

4.45″  LCD: Z4451080-V01

Firmware version: ？？？

Projector SN: X301220C23070001~250, and others

X30 （4.45” LCD ） firmware download 02

About X30 Smart Version Wifi-display Function

With the development of science and technology, in the current Bluetooth function, it is no longer used for Bluetooth to transfer files. The role of Bluetooth is only to transmit sound. The Bluetooth file transfer function has been replaced by APP.

Wifi, Bluetooth, wifi-display (airplay, Miracast, DLNA) are all different functions. The effects are different.

   wifi-display function, the projector displays the image and sound of the mobile phone screen through the mirroring function of the smartphone. This is not achieved using the Bluetooth function. It is achieved through the screen mirroring function that comes with the phone.

1. ios smartphonerealizes screen mirroring via projector’s “Magic Cast”app

Operation instruction video connection: https://youtu.be/wgE2O5rTiOw

2. Android smartphonesrealize screen mirroring via projector’s “miracast”app

Operation instruction video connection: https://youtu.be/-sK3NhCG-xQ

Note: Not all Android smartphones support the screen mirroring function. For smartphones that support screen mirroring, there are options similar to this in the “Settings” or “More Functions” options of the smartphone, for example: “Screen mirroing”, “Wifi-display”, “multi-screen”, “screen projection”, “play to”, “media output”, etc.

X30 Projector Operation Guidance Video 

1. How to operate BYINTEK X30 manual focus and auto focus?

Operation instruction video connection: https://youtu.be/0wB72q5q7yM

X30 Smart Version Projector Operation Guidance Video 

1. How to connect laptop Computer to BYINTEK X30 Smart projector?

Operation instruction video connection: https://youtu.be/E1OEukJemRQ

On the computer desktop, you can set 3 display modes

1. Duplicate mode: computer and projector display the same screen
2. Extended mode: The projector displays the extended screen of the computer
3. Display only monitor 1: Only display the laptop screen
4. Display only monitor 2: Only display the projector screen

2. How to use the BYITNEK X30 Smart Version projector (how to turn it on)?

Operation instruction video connection: https://youtu.be/RsMGPgb21N0

3. How to install a hanger for the BYINTEK X30 projector?

Operation instruction video connection: https://

4. How to check the system version information of BYINTEK X30 Android projector?

Operation instruction video connection: https://youtu.be/ix0B7sMUYSA

5. How to change the system language of BYINTEK X30 ?

Operation instruction video connection: https://youtu.be/bOMP0may8jE

6. How to set the default signal source of BYINTEK X30  after booting, for example to HDMI by default?

Operation instruction video connection: https://youtu.be/PjueLQAB_Mg

7. How to operate BYINTEK X30 to restore factory settings?

Operation instruction video connection: https://youtu.be/wuL_AWZDQ44

8. How to operate BYINTEK X30 image flip?

Operation instruction video connection: https://youtu.be/g7jiNiinZCQ

9. How to operate BYINTEK X30 vertical and horizontal keystone correction?

Operation instruction video connection: https://youtu.be/9Q94sjWcKJ4

10. How to operate BYINTEK X30 manual focus and auto focus?

Operation instruction video connection: https://youtu.be/0wB72q5q7yM

11. How to operate X30 Android to upgrade via network OTA?

Operation instruction video connection: https://youtu.be/jO2iqFgim28

12. How to operate X30 Android to update firmware via U disk?

Operation instruction video connection: https://youtu.be/DuZXgI4ccSU

13. How to operate BYINTEK X30 IPhone wireless screen mirroring?

Operation instruction video connection: https://youtu.be/wgE2O5rTiOw

14. How to operate BYINTEK X30 Android wireless screen mirroring?

Operation instruction video connection: https://youtu.be/-sK3NhCG-xQ

15. Where is the ARC function of the X30?

Operation instruction video connection: https://youtu.be/ecCf-5SUygk

16. Where is the CEC function of the X30?

Operation instruction video connection: https://youtu.be/qgVlSv3-0PM

17. How to control the projector to automatically play videos, pictures, advertisements
18. APK download link: https://we.tl/t-pMsCgqdnze
19. Download and install on the projector, APK name:look digital signage
20. Then link the projector and computer in the same network
21. After the projector installs this APK, open the APP device will prompt a code: similar to 875587
22. Log in to this website “https://app.lookit.hk/signin” on the computer, register the account to activate, enter the control page, enter the device code of the projector, and add the projector device
23. You can set the content you want to play through the computer in the background of this website.
24. Every time you start the projector, the projector will automatically play the set advertisement video or picture.
25. The X30 Smart Version projector can be set to start automatically when it is powered on. Operation steps: https:

X30 Series Projector Maintenance Guide

1. How to solve the problem of remote control not working?

1.1 The projector comes standard with a 2.4G wireless remote control. If the remote control does not work, you need to re-operate the remote control to pair with the projector.

The operation method is to take out the battery of the remote control, start the projector, wait for the projector to turn on, then move the remote control close to the projector, and then install the battery of the remote control, and the remote control will re-pair with the projector.

1.2 One remote control can only correspond to one projector, and cannot be used for two  at the same time.

1.3 If the pairing is unsuccessful, replace a remote control and try again.

1.4 If the replacement of the remote control still fails, it may be that the cable between the remote control receiver and the motherboard is loose. Reconnect the cable between the receiver and the motherboard.

1.5 If there is still a problem, there may be a problem with the remote control receiving circuit board or the main board. Just replace the corresponding parts. There is a disassembly video guide below.

2. How to replace the dust filter of BYINTEK X30series projector?

Fault phenomenon: If the projector has been used for a long time, the projector often shuts down automatically, or the projector screen slowly turns yellow, there may be too much dust on the filter screen. Remember to clean the dust on the filter screen regularly to ensure the normal heat dissipation of the projector.

Operation guide video URL: https://youtube.com/shorts/4VePG1TFGhI?feature=share

3. Without disassembling the projector, how to clean the dust on the screen of BYINTEK X30series projector?

Fault phenomenon: If there are movable dust particles or relatively large dust particles on the screen, you can turn on the projector, then turn the projector’s lens down, slap the projector body, and let the fan take away the dust.

Operation guide video URL: https://youtu.be/WlS3RpAQS-k

Operation guide video URL(new look): https://youtu.be/jNp6w08GiOU

4. Disassemble the projector to clean up the dust on the LCD of BYINTEK X30series projector

Fault phenomenon: If you find black dust-like dots on the projection screen, it means that there is dust or foreign matter on the LCD surface inside the projector, which needs to be disassembled and cleaned up.

Operation guide video URL: https://youtu.be/i5HpyzOV-EU

5. The lens of the BYINTEK X30 projector has no light coming out, and the LED does not work, how can I solve it?

Fault phenomenon: After the projector presses the power button, you can hear that the fan inside the projector is working normally, but there is no light coming out of the lens at all, maybe the LED is not working.

First, disassemble the projector to check whether the cables on the power board are connected properly. If the cables on the power board are connected normally and there is no looseness, the projector still does not work, and a new power board needs to be replaced. If it is still not normal, you need to replace the LED. If the lens still has no light after replacing the LED, you need to replace the motherboard.

Usually replace the power board projector is normal. LED damage is generally caused by high voltage breakdown of the projector’s LED due to lightning strikes or unstable household power grids.

Replacement power board tutorial video URL: https://youtu.be/UQflUPj-2PQ

6. Replace the power board of BYINTEK X30 series projector

Fault phenomenon: The power indicator on the top cover of the projector is not on, or there is no light coming out from the inside of the projector lens (that is, the LED does not work), it may be a problem with the power board, and the power board needs to be replaced

Operation guide video URL: https://youtu.be/UQflUPj-2PQ

7. Replace the focus motor of BYINTEK X30series projector

Fault phenomenon: If you press and hold the “F+” and “F-” buttons of the remote control, the projector lens cannot move back and forth, that is, it cannot be focused. It may be that the focusing motor is not working, or the circuit board connected to the focusing motor is not working. Replace both parts.

Operation guide video URL: https://youtu.be/Cdan3o_E1Qw

8. Replace the motherboard of BYINTEK X30series projector

Operation guide video URL: https://youtu.be/wd-zDabxUDU

9. Check whether the LCD cable connection is normal, how to reconnect the BYINTEK X30’s LCD cable?

Fault phenomenon: If the projector is transported by express, resulting in abnormal image display, streaks, white screen or black screen, it may be caused by loose LCD cable. Follow the video instructions at the URL below to reconnect the LCD cable. If the operation is still not normal, then the LCD should be replaced.

Operation guide video URL: https://youtu.be/i5HpyzOV-EU

10. How to replace the LCD of the BYINTEK X30 projector?

Fault phenomenon: If the picture image is abnormal, there are colored streaks, or there are cracks, black blocks that will not recover after the projector cools down, etc., the LCD may be damaged and the LCD needs to be replaced. 

Disassemble the projector, use the mobile phone to shoot the text on the LCD cable for your after-sales customer service, the customer service will send it to you according to the corresponding LCD arrangement, and the projector system firmware used for different LCDs is different. If a different LCD is replaced, it will cause the projected image to display abnormally. At this time, the customer service needs to send you the system firmware corresponding to the LCD you received, copy the program to the U disk and directory, and insert it into the USB of the projector. Then connect the projector to the power supply, wait for a few seconds, then press and hold the power button for 10 seconds, then release the button, let the projector update the program automatically, wait for 10 minutes, if the projector has an image, it means it is normal.

Operation guide video URL: https://youtu.be/i5HpyzOV-EU

11. What should I do if the remote control does not respond? How to replace the 2.4G remote control receiver inside the BYITNEK X30 series projector?

Solution:

1. Turn on the projector first, then remove and re-install the batteries of the remote control.
2. If it still doesn’t work, please replace the remote
3. If replacing the remote control does not work, please replace the remote control receiver inside the projector

Replacing the remote control receiver inside the projector, operation guide video URL:  https://

12. BYINTEK X30series projector all parts disassembly instruction video （disassemble: motherboard, LCD, power board, fan, Insulation glass, reflector, lens, LED, focus motor, speaker, ）

Operation guide video URL: https://youtu.be/DOSSzINmJjs